※本網站所提供產品規格內容如有變更,恕不另行通知。實際請以各廠牌官方最新公告資訊為主。
Projector type |
1-Chip DLP™ projectors |
DLP™ chip |
|
Panel size |
17.0 mm (0.67 in) diagonal (16:10 aspect ratio) |
Display method |
DLP™ chip x 1, DLP™ projection system |
Number of pixels |
2,304,000 (1920 x 1200 pixels) |
Light source |
Laser diode |
Light output |
7,500 lm2 / 7,500 lm (ANSI)3 / 7,700 lm (Center)4 |
Time until light output declines to 50 % |
20,000 hours (NORMAL/QUIET), 24,000 hours (ECO) |
Resolution |
WUXGA (1920 x 1200 pixels) |
Contrast ratio |
15,000:1 (Full On/Full Off, Dynamic Contrast [3]) |
Screen size (diagonal) |
1.27–5.08 m (50–200 in) with ET-DLE055, 1.27–15.24 m (50–600 in) with ET-DLE060/ET-DLE085/ET-DLE105/ET-DLE150/ET-DLE170/ET-DLE250/ET-DLE350, 2.54–8.89 m (100–350 in) with ET-DLE035, 2.54–10.16 m (100–400 in) with ET-DLE020 |
Center-to-corner zone ratio2 |
90 % |
Lens |
Optional (no lens included with this model) |
Lens shift (From the origin point of the lens mounter) |
|
Vertical |
+60 %, -16 % (with ET-DLE150/ET-DLE170/ET-DLE250/ET-DLE350/ET-DLE450); |
Horizontal |
+30 %, -10 % (with ET-DLE150/ET-DLE170/ET-DLE250/ET-DLE350/ET-DLE450); |
Keystone correction range |
Vertical: ±45 ° (±5 ° with ET-DLE020, +5 ° with ET-DLE035, ±16 ° with ET-DLE060, ±22 ° with ET-DLE55/ET-DLE085/ ET-DLE105, ±40 ° with ET-DLE150/ET-DLE170/ET-DLE250) |
Installation |
Ceiling/floor, front/rear, free 360-degree installation |
Terminals |
|
HDMI™ IN |
HDMI™ x 2 (Deep Color, compatible with HDCP 2.3, 4K/60p signal input7) |
SERIAL IN |
D-sub 9-pin (female) x 1 for external control (RS-232C compliant) |
SERIAL OUT |
D-sub 9-pin (male) x 1 for link control (RS-232C compliant) |
REMOTE IN |
M3 stereo mini-jack x 1 for wired remote control |
REMOTE OUT |
M3 stereo mini-jack x 1 for link control (for wired remote control) |
DIGITAL LINK/LAN |
RJ-45 x 1 for network and DIGITAL LINK connection (video/network/serial control) (HDBaseT™ compliant), 100Base-TX (Compatible with PJLink™ [Class 2], Art-Net, HDCP 2.3, Deep Color, 4K/60p7, 8 signal input) |
LAN |
RJ-45 x 1 for network connection, PJLink™ (Class 2) compatible, 10Base-T/100Base-TX, Art-Net compatible |
USB (DC OUT) |
USB connector (Type A) x 1 for optional AJ-WM50 Series Wireless Module/USB memory, (for power supply, DC 5 V, 2 A) |
Expansion slot |
Open slot for function boards, Intel® SDM standard-compatible |
Protocol versions |
IPv4, IPv69 |
Power supply |
AC 100–240 V, 50/60 Hz |
Maximum power consumption |
660 W (6.8–2.8 A) (680 VA) (Power consumption is 640 W at AC 200–240 V) |
On-mode power consumption (Operating mode) |
[NORMAL]530 W (AC 100–120 V) |
Cabinet materials |
Molded plastic |
Operation noise |
35 dB (NORMAL/ECO), 32 dB (QUIET) |
Dimensions (W x H x D) |
Approx. 498 x 170 x 440 mm (19 19/32˝ x 6 11/16˝ x 17 5/16˝) (With legs at shortest position, excluding protruding parts) |
Weight |
Approx. 17 kg (37.5 lbs) (TBD) |
Operating environment |
Operating temperature: 0–45 °C (32–113 °F)12, operating humidity: 10–80 % (no condensation) |
Applicable software |
Multi Monitoring & Control Software, Projector Network Setup Software, Real-Time Tracking Projection-Mapping System13, Geometry Manager Pro, Smart Projector Control for iOS/Android™ |
Control function via LAN |
Crestron Connected™ V2, Crestron XiO Cloud™, Art-Net DMX, AMX® DD, and PJLink™ (Class 2) |
運送說明
1.本網站訂購之商品將於訂單轉出後統一由服務人員與您聯繫配送,本公司配合物流如下:
*神行貨運。
*台快貨運。
*宅急便物流。
*便利帶物流。
*郵局。
*宏程自行配送。
**商品如無特殊情況( 遇原廠缺貨、客戶延期.....等)將於2個工作日內出貨。配送時間依照各地物流配達為主。如需詢問可透過官方LINE:@daka1788 或電話 02-23942890 詢問配送進度。
2.詳細配送說明
(1)商品如標示免運費。則消費者毋須負擔運費。
(2)如遇偏遠地區,將依地區收取偏遠運費。
(3)不提供舊機拆卸安裝與回收服務
(4)詳細配送條件將於訂單確認時由專員與您核對。
(6)如遇無電梯之樓層,將依樓層收取樓層費。
(7)貨運僅配送額外服務需求將依現場報價收取。
3.影音產品配送
(1)商品將於訂單付款完成後2個工作天內出貨。
(2)商品將依據大小、地區,調整配送方式,恕不可指定配送商
提醒您。於宏程購物網購買之商品必須於網頁申請退換貨:點我前往(電話或口頭告知皆不成立)
依照消費者保護法規定,消費者均享有產品到貨7天猶豫期之權益(注意!猶豫期非試用期),但提醒您,商品退貨時必須是全新狀態且包裝完整,所有內容物必須回復原狀,亦即必須回復至您收到商品時的原始狀態 (包含主機、附件、內外包裝、隨機文件、贈品等),若為部分商品退貨則針對您已使用或保留之商品應另以市價計價,否則將影響您退貨的權限。
*7天猶豫期(非試用期)內進行商品退換貨時,應負有回復原狀之義務。
*退換貨商品必須是全新商品,商品與盒裝外觀不得有刮傷、破損、受潮、塗寫文字,且必須保有相關配件(保護袋、配件包裝、保麗龍、贈品、所附文件...等)之完整性。
*猶豫期內請保留原「運送外箱」,勿讓物流商或貨運公司收走,以便退換貨返還時保護商品使用。
*另投影機,顯示器、音響除產品本身故障或瑕疵外,一經使用將會影響退貨權限。
<<特殊情況無法退貨>>
1. 商品因消費者個人因素需延後配送超過訂單日7天以上。經告知為保留商品無法退貨後,即不允退貨。
2. 商品原始外包裝與包材(紙箱、保麗龍、保護材….等)遺失、損毀或非使用原始包材,因無法確保物流配送狀況,則不允退貨。
3. 經原廠判定為人為損壞商品,因商品已無法復原原始狀態,不允退貨。
<<換貨流程>>
1. 商品經使用者開封使用後,如商品本身瑕疵,將通知原廠服務站到府檢測。
2. 原廠確認新品不良後,始可換貨。
3. 非商品本身瑕疵換貨,消費者如無法復原原始商品,須負擔整新費用(依照使用程度逐項收取)。
4. 非新品猶豫期間內提出申請換貨(商品送達後7日後),將由原廠服務站與消費者說明後續處理。
<<特別說明>>
1. 大型商品退貨原因如為商品異常,將請原廠指定服務單位到府鑑定商品,請於退貨時一併將檢測單據附上,如無法附上或拒絕原廠指定服務單位到府檢測將視為良品退貨,並依照使用程度逐項收取費用。
2. 大型商品回收時將於回收地點現場基本商品狀況確認,如消費者拒絕人員確認或無法於取回地點確認,經人員回報後,則不允回收商品並拒絕退貨。
3. 配送或回收商品僅有一次免費派遣,如因消費者因素造成二派情況,產生費用將由消費者支付。
4. 配送人員安裝商品,視同消費者使用商品,如對商品有疑慮,消費者有權選擇不安裝
5. 本公司收到您下單(要約)後,仍需確認交易條件正確、供貨商品有庫存或服務可提供。如有無法接受訂單之異常情形,或您下單後未能完成正常付款,應視為訂單(買賣契約)全部自始不成立或失效,本公司得於合理期間內通知說明拒絕接受訂單。請您重新依需求下單訂購。