Panasonic PT-RQ50K 大型雷射工程投影機(請來電詢問)

01 Key Feature

50,000 lm^*1 Native 4K Color-Rich Images for a Breathtaking Viewing Experience

Unleashes 50,000 lm^*1 at Native 4K for emotionally immersive projection with newly developed laser engine expanding color-gamut by 114%^*3 using an additional red laser for breathtaking image performance

More Information

02 Key Feature

Versatile All-in-One Design Streamlines On-Site Workflow

Convenient all-in-one body packs 50,000 lm^*1 into PT-RQ32K’s compact footprint for easy installation, while Smart Projector Control Ver. 2.0^*4 with NFC^*5 and Remote Preview enable swift setup even in Standby mode

More Information

03 Key Feature

Original Cooling System Secures Projection Stability

Redesigned airflow path, cooling system, and finless radiator reinforce reliability at events. Dynamic Digital Control precisely regulates red laser output and cooling for supremely consistent image quality

More Information

*1 Measurement, measuring conditions, and method of notation all comply with ISO/IEC 21118: 2012 international standards. Value is average of all products when shipped.

*2 Average light-output value of all shipped products measured at center of screen in NORMAL Mode.

*3 In comparison to the Panasonic PT-RQ32K.

*4 For more information on Smart Projector Control app for Android™ and iOS devices, please visit the Smart Projector Control website.

*5 Availability may vary by country or region.

50,000 lm^* Native 4K Color-Rich Images for a Breathtaking Viewing Experience

Awe-Inspiring Color, Brightness, and Resolution

The PT-RQ50K represents a milestone in projection technology. Serving flawless Native 4K (4096 x 2160) images with a laser engine that combines one red laser and two blue lasers operating at different wavelengths, light output is doubled from the same footprint as our 26,000 lm PT-RQ32K 4K projector. Deployed at sporting events, arena concerts, outdoor mapping attractions, or museum exhibitions, the PT-RQ50K’s refined power will exceed the highest expectations.

* Measurement, measuring conditions, and method of notation all comply with ISO/IEC 21118: 2012 international standards. Value is average of all products when shipped.

Note: Comparative dimensions are approximate.

Newly Developed Laser Engine Expands the Color Gamut

An all-new laser engine expands color-gamut to 114 % of our current PT-RQ32K flagship, achieving lush, vibrant hues that pull audiences into the artist’s world. A new red laser enhances two blue lasers, which output light at different wavelengths for high color accuracy. Combined with digital frame-by-frame control to manage light output according to the scene’s contrast and brightness requirements and dedicated red-laser cooling to precisely control temperature, the PT-RQ50K attains vivid reds and deep, natural blues for spectacular on-screen color expression.

Versatile All-in-One Design Streamlines On-Site Workflow

Compact All-in-One Body with Built-in Cooling

The PT-RQ50K’s laser engine and optical drive doubles output power from the same compact footprint as the PT-RQ32K. A redesigned airflow path and new finless radiator boosts the efficiency of the liquid cooling system, while a separate cooling for the red laser is regulated by Dynamic Digital Control for excellent image consistency and high reliability. Space-saving design with integrated cooling systems bring the logistic efficiencies of all-in-one projection to large-venue staging, saving operators time and money.

* Comparative dimensions are approximated.

Remote Preview Saves Time and Unnecessary Stress

Newly introduced within Multi Monitoring & Control Software and also accessible via web browser, Remote Preview allows projectionists to check the content being received by the projector via a Wi-Fi®- or LAN-connected laptop. It works with the projector in Standby, with the shutter on, or when direct sunlight makes inspecting on-screen images difficult. It gives a chance to fix errors between the source and projector before setup is completed.

Built-in Upgrade Kits for Geo Pro Software Now Preactivated

With the PT-RQ50K, upgrade features for Geometry Manager Pro are built into the software and do not require paid activation. Simply download and install Geo Pro to a PC to simplify advanced multi-screen geometric adjustments. Built-in capabilities include uniformity correction and Auto Screen Adjustment for automatic and simultaneous calibration of multiple screens (including curved-screen correction) using a compatible camera. These features expedite edge-blending and color-matching in mapping applications with automatic calibration for black level, brightness uniformity, and stacking.

Note: Register your projector at PASS to download free Geometry Manager Pro software for PC. Note that Mac OS is not supported. Compatible cameras comprise Panasonic AW-HE70/ AW-UE70 and Nikon D5200/D5300/D5500/D5600. Visit PASS at for more information.

Geometric Adjustment with Free Grid Correction via Remote Control

Free Grid is a function in Geometric Adjustment that enables convenient grid-based image adjustment using the projector’s remote controller. Grid resolutions of 2 x 2, 3 x 3, 5 x 5, 9 x 9, or 17 x 17 can be projected and areas of the image reshaped or geometrically altered to compensate for screen distortions. This correction is easily performed by adjusting control points located at grid-line intersections. Move freely between grid resolutions to achieve the desired level of granularity without losing work progress. This clever data-saving function allows technicians to smoothly create a distortion-free projection in a wide range of installation situations.

Remote App with NFC Function^*1 and Projector Auto-Focus via Smartphone Camera

Smart Projector Control app for Android™ and iOS now includes Near Field Communication (NFC) function to instantly pair smartphone to projector just by touching them together. Once linked, the app accesses an information settings menu that’s readable and writable^*2 for easy adjustment without turning on the projector. As well as showing data and allowing certain settings to be changed, the app features an auto-focus function^*3 that uses the smartphone’s camera and app UI to achieve fast yet precise image focus.

Smart Projector Control (Web Manual)

*1 Availability may vary by country or region.

*2 The ability to write data is not possible with iOS devices. Use of functions described may require prior activation within the projector’s settings. Check the App Store or the Google Play store for minimum device and OS requirements, or click here for more information.

*3 Auto Focus may not be compatible with some mobile devices.

Note: In some countries, projector activation is required to use NFC function. Please click here for a list of countries where an optional ET-NUK10 Upgrade Kit can be obtained to enable NFC function. For more information, please visit PASS. If NFC function is disabled, the app’s NFC screen is displayed, but reading/writing data is not possible.

New Information Monitor

To further simplify setup and operation of the PT-RQ50K, an Information Monitor is located on the side panel adjacent to terminals and physical controls. The monitor provides menu-based navigation for smooth setup of Projector ID and basic network configuration. It also shows projector status including temperature, runtime, and active signal data, as well as error codes should a problem be detected.

Dual Power Supplies Save Time During Setup [Japan/U.S. Only]

The PT-RQ50K equips dual power supplies and supports 200–240 V current for full-brightness projection as well as 100–120 V at a lower brightness for setup and calibration. This feature is of incalculable value at events where installation deadlines are tight (such as trade shows) as the PT-RQ50K can be set up and adjusted on regular mains power before high-current power is rolled out. No more wasted time on unforeseen holdups—this keeps your team on schedule as event infrastructure comes together around you.

Note: Brightness is restricted to one fifth with voltage of 100‒120 V.

Dedicated Lenses Cover All Throw-Ratios

An exclusive new lineup of optional lenses for the PT-RQ50K provides gapless throw-ratio coverage from 1.11–1.70:1 to 4.97–7.76:1, adapting projections to suit the installation site. All six models support powered zoom, lens-shift, as well as lens memory and lens ID for easier on-site adjustments. AFO (Active Focus Optimizer) feature optimizes focus based on content APL, keeping images sharp and in focus.

Click here to check the new lens lineup.

Original Cooling System Secures Projection Stability

Reliable Red-Laser Performance for Intense Color

Red lasers demonstrably heighten color expression. However, implementation of the technology has been a challenge due to the laser’s sensitivity to temperature fluctuation. Panasonic innovates a highly stable red-laser drive that digitally controls light output within precise parameters frame-by-frame using Dynamic Digital Control and an independent cooling system. The additional red laser is key to the PT-RQ50K’s vivid red reproduction and a superior RGB balance.

Shielded Laser Drive with Finless Radiator

Hermetically sealed DMD block, shielded laser drive, and filterless cooling system is reinforced by a new finless radiator that improves cooling efficiency by as much as 30 % over previous implementations while protecting critical components from dust intrusion. The projector exceeds common international dustproofing guidelines and is manufactured in Japan to extremely rigorous quality control standards. Business operators can expect up to 20,000 hours* of reliable maintenance-free projection at full brightness.

* Around this time, light output will have decreased by approximately 50 %. IEC62087: 2008 Broadcast Contents, NORMAL Mode, Dynamic Contrast [3], temperature 35 °C (95 °F), elevation 700 m (2,297 ft) with 0.15 mg/m³ of airborne particulate matter. Estimated time until brightness decreases to 50 % will vary depending on environment and usage conditions. Parts other than the light source may require replacement before 20,000 hours, and checkup is recommended around this time.

Solid-State Laser Modules with Failover Circuitry

The SOLID SHINE Laser drive groups laser diodes into discrete modules. In the unlikely event one single diode in a module goes out, Failover Circuitry enables the diodes in the affected series to be bypassed—the remaining, functional diodes continue to operate with imperceptible loss in brightness. If a laser diode fails in other laser projectors, the whole module goes down and the brightness loss is so great that the projector must be taken offline. Panasonic laser diode failover technology adds yet another layer of insurance for events projection when image presentation must be maintained.

Backup Input Guarantees Picture Display

If the primary signal is disrupted, the projector switches to a backup input^*1 in just 0.3 seconds at the fastest^*2, so image display is maintained when projection mustn’t be interrupted. No screen-blanking occurs during backup input-switching.

*1 Combination of primary/secondary input terminals is fixed. Switching to secondary input (or primary input) occurs automatically when the input signal for primary input (or secondary input) is disrupted. The Backup Input Setting is enabled only when the input signal to primary and secondary terminals is the same.

*2 Switching speed is an approximate value and may vary depending on backup input mode settings and source device configuration.

※本網站所提供產品規格內容如有變更，恕不另行通知。實際請以各廠牌官方最新公告資訊為主。

運送說明
1.本網站訂購之商品將於訂單轉出後統一由服務人員與您聯繫配送，本公司配合物流如下：

*神行貨運。

*台快貨運。

*宅急便物流。

*便利帶物流。

*郵局。

*宏程自行配送。

**商品如無特殊情況( 遇原廠缺貨、客戶延期.....等)將於2個工作日內出貨。配送時間依照各地物流配達為主。如需詢問可透過官方LINE：@daka1788 或電話 02-23942890 詢問配送進度。

2.詳細配送說明

   (1)商品如標示免運費。則消費者毋須負擔運費。

   (2)如遇偏遠地區，將依地區收取偏遠運費。

   (3)不提供舊機拆卸安裝與回收服務

   (4)詳細配送條件將於訂單確認時由專員與您核對。

   (6)如遇無電梯之樓層，將依樓層收取樓層費。

   (7)貨運僅配送額外服務需求將依現場報價收取。

3.影音產品配送

   (1)商品將於訂單付款完成後2個工作天內出貨。

   (2)商品將依據大小、地區，調整配送方式，恕不可指定配送商

提醒您。於宏程購物網購買之商品必須於網頁申請退換貨：點我前往(電話或口頭告知皆不成立)

依照消費者保護法規定，消費者均享有產品到貨7天猶豫期之權益(注意！猶豫期非試用期)，但提醒您，商品退貨時必須是全新狀態且包裝完整，所有內容物必須回復原狀，亦即必須回復至您收到商品時的原始狀態 (包含主機、附件、內外包裝、隨機文件、贈品等)，若為部分商品退貨則針對您已使用或保留之商品應另以市價計價，否則將影響您退貨的權限。

*7天猶豫期（非試用期）內進行商品退換貨時，應負有回復原狀之義務。

*退換貨商品必須是全新商品，商品與盒裝外觀不得有刮傷、破損、受潮、塗寫文字，且必須保有相關配件（保護袋、配件包裝、保麗龍、贈品、所附文件...等）之完整性。

*猶豫期內請保留原「運送外箱」，勿讓物流商或貨運公司收走，以便退換貨返還時保護商品使用。

*另投影機，顯示器、音響除產品本身故障或瑕疵外，一經使用將會影響退貨權限。

<<特殊情況無法退貨>>

1.  商品因消費者個人因素需延後配送超過訂單日7天以上。經告知為保留商品無法退貨後，即不允退貨。

2.  商品原始外包裝與包材(紙箱、保麗龍、保護材….等)遺失、損毀或非使用原始包材，因無法確保物流配送狀況，則不允退貨。

3. 經原廠判定為人為損壞商品，因商品已無法復原原始狀態，不允退貨。

<<換貨流程>>

1.      商品經使用者開封使用後，如商品本身瑕疵，將通知原廠服務站到府檢測。

2.      原廠確認新品不良後，始可換貨。

3.      非商品本身瑕疵換貨，消費者如無法復原原始商品，須負擔整新費用(依照使用程度逐項收取)。

4.      非新品猶豫期間內提出申請換貨(商品送達後7日後)，將由原廠服務站與消費者說明後續處理。

<<特別說明>>

1.   大型商品退貨原因如為商品異常，將請原廠指定服務單位到府鑑定商品，請於退貨時一併將檢測單據附上，如無法附上或拒絕原廠指定服務單位到府檢測將視為良品退貨，並依照使用程度逐項收取費用。
2.   大型商品回收時將於回收地點現場基本商品狀況確認，如消費者拒絕人員確認或無法於取回地點確認，經人員回報後，則不允回收商品並拒絕退貨。
3.   配送或回收商品僅有一次免費派遣，如因消費者因素造成二派情況，產生費用將由消費者支付。
4.   配送人員安裝商品，視同消費者使用商品，如對商品有疑慮，消費者有權選擇不安裝
5.   本公司收到您下單(要約)後，仍需確認交易條件正確、供貨商品有庫存或服務可提供。如有無法接受訂單之異常情形，或您下單後未能完成正常付款，應視為訂單(買賣契約)全部自始不成立或失效，本公司得於合理期間內通知說明拒絕接受訂單。請您重新依需求下單訂購。