Panasonic PT-RQ32K 雷射高階工程投影機(請來電詢問)

-光度輸出: 27,000 流明 (中央部份)；對比度 : 20000:1
-解像度 : 4K+ (5120×3200)(Quad Pixel Drive: ON)
-用Laser diode 光源，可長時間使用
-240Hz 畫面更新率(Refresh rate)
-光亮色彩控制技術,可同步平衡多部投影機之亮度色彩
-備用輸入功能，主輸入訊源故障時可自動切換至備用訊源
-載置全新DIGITAL LINK功能，兼容HDbaseT技術的數碼連接，可以單－電纜傳送數碼訊號 (最長100米)至投影機
-內置幾何調整功能，可投射畫面至弧型表面而不會失真，更可選配升級套件ET-UK20，提高幾何調整功能
-可選購數碼介面盒ET-YFB100G 或 ET-YFB200G
-可選配0.36:1投射比的超短距鏡頭ET-D75LE95

Give Your Business an Edge with 4K⁺ Projection

The PT-RQ32K gives resellers and staging professionals an opportunity to upgrade quality of service while reducing overheads and total cost of ownership. Panasonic’s 3-Chip DLP™ SOLID SHINE Laser 4K⁺ flagship maintains image consistency longer with huge output power and lower maintenance with fractional weight of competitive projectors. Deliver total immersion in temporary and permanent installations for single or multi-projection layouts. Reimagine your business in 4K⁺ by Panasonic.

PT-RQ32KLenses sold separately.

The SOLID SHINE Laser Advantage

Bright and Vivid Picture Quality from 3-Chip DLP™ SOLID SHINE Laser

Combining 3-Chip DLP™ imaging with original SOLID SHINE Laser Phosphor technology, Panasonic 3-Chip DLP™ SOLID SHINE Laser Series produces vividly colored pictures rich in detail with excellent brightness. Solid-state laser light sources and specially engineered heat-resistant phosphor wheels work together with three discrete DLP™ modules (R/G/B) for high brightness, true color accuracy, and high contrast in large venues.

Precision Color Reproduction

3-Chip DLP™ SOLID SHINE Laser projectors capture a more accurate color space than comparable laser projectors. Blue lasers ensure greater precision while an expanded color gamut improves white-balance accuracy.

Lower Total Cost of Ownership

Projector delivers up to 20,000 hours^*1 maintenance-free service at full power with no filters to clean or replace^*2 thanks to a fully sealed optical block and redesigned air intake. Energy consumption has also been reduced.

*1 At this time the brightness will have decreased to approximately half of its original level. Please refer specification for detail condition.
Filter Replacement Period:
Supplied Filter: 2,000 hours (High Mode), 4,000 hours (Normal Mode)
Long Life Filter: 4,000 hours (High Mode), 20,000 hours (Normal Mode)

*2 Usage environment may affect filter maintenance cycle.

Dual-Laser Optical Engine Assures Failsafe Reliability

Dual-Drive Laser Optical Engine groups laser diodes into two discrete modules. A redundancy circuit works to minimize brightness- and color-uniformity loss should a laser diode fail, making supported products ideal for applications where picture presentation must be maintained.

Dustproof Optics Extend Longevity

Hermetically sealed laser modules and a refined air-intake system work to extend life and maintain picture quality in dusty locations. SOLID SHINE Laser products are tested against more severe guidelines than other projectors for stable operation in dusty environments containing 0.150 mg of particulate matter per cubic meter*.

* Dustproof tests are conducted to confirm operational effectiveness under conditions with 0.15 mg/m³ of particulate matter (based on tests by the American Society of Heating, Refrigerating, and Air-Conditioning Engineers [ASHRAE], and the Japanese Building Maintenance Association). Measurements are made using acceleration tests.

Efficient Cooling System Enhances Reliability

A liquid cooling system for the light source features a new air intake and solid aluminum radiator to suppress temperature rises, allowing stable operation in high temperatures while reducing noise*.

* Please refer to product specifications for more details.

Optional Long Life Filter for 20,000-hour Service-free Operation

Long Life Filter includes an electrostatic Micro Cut Filter to collect minute dust particles with an ion effect. Combined with a dust-resistant cabinet, this enables 20,000 hours* of projection with no maintenance.

* Please refer to the specification for detail condition.

Image Quality and Reliability

Quad Pixel Drive Goes Beyond 4K

Better-than-4K resolution is achieved by employing a high-speed 2560 x 1600-pixel (WQXGA) DMD chip that shifts each pixel vertically and horizontally, quadrupling the pixel-count. Working in concert with Real Motion Processor 240 Hz frame-creation, Quad Pixel Drive technology produces film-like 5120 x 3200-pixel (4K⁺/16:10) images. As well as silk-smooth video, this powerful processing engine renders text in the finest detail for lectures and presentations.

Pixel Quadrupling Technology

Shifting pixels vertically and horizontally creates ultra-high-resolution pictures that exceed standard Ultra HD resolution.

Real Motion Processor

High-speed 240 Hz frame creation supports images up to 5120 x 3200 pixels (16:10) resolution.

* Resolution 5120 x 3200 pixels (maximum physical resolution).

240 Hz Real Motion Processor Reduces Motion Blur

Real Motion Processor uses sophisticated algorithms to create three additional frames for each image, boosting native 60 fps footage to 240 frames per second^*1. The result is smooth and realistic motion rendering, particularly useful for broadcasting sporting events and other fast-paced video. Further, images can be displayed with SDI, DVI-D, and HDMI simultaneous inputs^*2. A refined optical engine enhances focus performance for a lifelike sense of resolution, contrast, and fluidity.

*1 Refresh rate varies depending on vertical scanning frequency. Note that 240 Hz frame rate is downsampled to 60 Hz when projecting at 4K⁺ resolution.

*2 Geometric Adjustment and Upgrade Kit functions are not supported with simultaneous video signal input.

Detail Clarity Processor 5⁺

Panasonic’s next-generation circuit technology analyzes individual images frame by frame to clarify areas containing fine details and textures. Algorithms extract hidden information from super-high to low-frequency video bands, sharpening outlines, correcting contours, and reducing ringing noise to improve the sense of resolution. The technology includes an exclusive Refine Enhancer algorithm to further optimize detail reproduction in 4K⁺ images.

Dynamic Contrast Function for High 20,000:1 Contrast

Direct laser power output modulation achieves high contrast with less power consumption. Digitally controlled frame-by-frame scene-linking modulation ensures precise output adjustment, while accurate 20,000:1* contrast is delivered even when bright and dark scenes frequently interchange.

* Please refer to the specification page for detail condition.

System Daylight View 3

Panasonic’s premium System Daylight View 3 stops pictures washing out in bright light and enhances impact in mapping and multi-projector applications. It uses sensor information to adjust sharpness, manipulate gamma curves, and correct colors to suit on-site conditions.

Supports BT.2020 and HDR for Latest 4K Standard

An emulation mode for BT.2020, a 4K color-space standard, reproduces a wider color gamut than conventional Rec.709 standard. Additionally, the projectors support HDR (High Dynamic Range). Ultra-high-resolution image reproduction is truly stunning, from deepest black to sparkling bright highlights.

90 % Brightness Uniformity

SOLID SHINE Laser delivers superior screen brightness uniformity thanks to highly accurate white balance control. Brightness uniformity is greater than 90 % when measured at the corners, edges, and center of the screen.

Installation Flexibility and Powerful Functionality

Free 360-degree Installation

SOLID SHINE Laser technology enables free 360-degree installation through any axis. Together with powered lens shift and a wide range of optional lenses, the projector can be mounted in any way desired without picture distortion temporarily or in permanent applications.

Contrast Sync and Shutter Sync Function

Contrast Sync function, designed for multi-screen applications, allows dynamic contrast control to be synchronized for consistent picture quality across screens. Shutter Sync, meanwhile, synchronizes shutter on/off timing.

* Includes fade-in and fade-out effects. Projector shutter functions can be set to operate individually if desired.

Single-Cable 4K DIGITAL LINK Connection

Based on HDBaseT™ technology, DIGITAL LINK supports transmission of video, audio^*1, and control commands through a single CAT 5e or higher STP cable for distances of 150 m (492 ft) for Full HD video and 50 m (164 ft) for 4K^*2 video. An optional DIGITAL LINK Switcher or Digital Interface Box further simplifies installation in large venues while reducing cost and improving reliability.

*1 Audio transmission depending on model’s audio capability.

*2 ET-YFB200G/YFB100G is not compatible with 4K signals. 150 m (492 ft) transmission available only with ET-YFB200G DIGITAL LINK Switcher for signals up to 1080p in Long Reach Mode.

Backup Input Setting Assures Picture Display

Projectors switch instantaneously to a backup input signal should the primary input signal be disrupted*, assuring image display is maintained at all times in venues such as control rooms and adding insurance at events where projection must not be interrupted.

* Combination of primary/secondary input terminals is fixed. Switching to secondary input (or primary input) occurs automatically when the input signal for primary input (or secondary input) is disrupted. The Backup Input Setting is enabled only when the input signal to primary and secondary terminals is the same.

Geometry Manager Pro Software and Upgrade Kits

Download free Geometry Manager Pro software to expand geometric and multi-screen setup and calibration capabilities via PC. The suite includes two upgrade kits that can be optionally unlocked with paid key codes. ET-UK20 adds uniformity correction and extensive creative masking capabilities. ET-CUK10 features Auto Screen Adjustment which enables simultaneous setup (including curved-screen correction) of multiple projectors for multi-screen applications using a compatible camera. This streamlines edge-blending, color-matching, black-level, stacking, and brightness uniformity calibration.

Note: Requires the latest firmware. Register your projector at PASS to update firmware, get free Geometry Manager Pro software for PC, obtain activation keys for ET-UK20 and ET-CUK10, and download a plug-in for ET-CUK10. Compatible cameras for ET-CUK10 comprise Panasonic AW-HE70/ AW-UE70 and Nikon D5200/D5300/D5500/D5600.
Visit PASS at https://panasonic.net/cns/projector/pass for more information.

Early Warning Software ET-SWA100 Series (Optional)

Early Warning Software monitors the status of projectors and displays connected to an intranet, and informs the operator when an abnormality is detected or predicted, or when there are symptoms of trouble. This minimizes downtime to provide more stable operation.

Common Lenses for Panasonic 3-Chip DLP™ Projectors

Panasonic 3-Chip DLP™ projectors share a range of optional lenses, including ultra-short-throw lens and zoom lens for long throw distances, reducing cost of ownership for staging and event companies with large projector inventories.

Eyebolt-ready for Crane Installations

Eyebolts allow the projector to hang from a crane, simplifying rigging at large event venues for rental/staging professionals.

※本網站所提供產品規格內容如有變更，恕不另行通知。實際請以各廠牌官方最新公告資訊為主。

運送說明
1.本網站訂購之商品將於訂單轉出後統一由服務人員與您聯繫配送，本公司配合物流如下：

*神行貨運。

*台快貨運。

*宅急便物流。

*便利帶物流。

*郵局。

*宏程自行配送。

**商品如無特殊情況( 遇原廠缺貨、客戶延期.....等)將於2個工作日內出貨。配送時間依照各地物流配達為主。如需詢問可透過官方LINE：@daka1788 或電話 02-23942890 詢問配送進度。

2.詳細配送說明

   (1)商品如標示免運費。則消費者毋須負擔運費。

   (2)如遇偏遠地區，將依地區收取偏遠運費。

   (3)不提供舊機拆卸安裝與回收服務

   (4)詳細配送條件將於訂單確認時由專員與您核對。

   (6)如遇無電梯之樓層，將依樓層收取樓層費。

   (7)貨運僅配送額外服務需求將依現場報價收取。

3.影音產品配送

   (1)商品將於訂單付款完成後2個工作天內出貨。

   (2)商品將依據大小、地區，調整配送方式，恕不可指定配送商

提醒您。於宏程購物網購買之商品必須於網頁申請退換貨：點我前往(電話或口頭告知皆不成立)

依照消費者保護法規定，消費者均享有產品到貨7天猶豫期之權益(注意！猶豫期非試用期)，但提醒您，商品退貨時必須是全新狀態且包裝完整，所有內容物必須回復原狀，亦即必須回復至您收到商品時的原始狀態 (包含主機、附件、內外包裝、隨機文件、贈品等)，若為部分商品退貨則針對您已使用或保留之商品應另以市價計價，否則將影響您退貨的權限。

*7天猶豫期（非試用期）內進行商品退換貨時，應負有回復原狀之義務。

*退換貨商品必須是全新商品，商品與盒裝外觀不得有刮傷、破損、受潮、塗寫文字，且必須保有相關配件（保護袋、配件包裝、保麗龍、贈品、所附文件...等）之完整性。

*猶豫期內請保留原「運送外箱」，勿讓物流商或貨運公司收走，以便退換貨返還時保護商品使用。

*另投影機，顯示器、音響除產品本身故障或瑕疵外，一經使用將會影響退貨權限。

<<特殊情況無法退貨>>

1.  商品因消費者個人因素需延後配送超過訂單日7天以上。經告知為保留商品無法退貨後，即不允退貨。

2.  商品原始外包裝與包材(紙箱、保麗龍、保護材….等)遺失、損毀或非使用原始包材，因無法確保物流配送狀況，則不允退貨。

3. 經原廠判定為人為損壞商品，因商品已無法復原原始狀態，不允退貨。

<<換貨流程>>

1.      商品經使用者開封使用後，如商品本身瑕疵，將通知原廠服務站到府檢測。

2.      原廠確認新品不良後，始可換貨。

3.      非商品本身瑕疵換貨，消費者如無法復原原始商品，須負擔整新費用(依照使用程度逐項收取)。

4.      非新品猶豫期間內提出申請換貨(商品送達後7日後)，將由原廠服務站與消費者說明後續處理。

<<特別說明>>

1.   大型商品退貨原因如為商品異常，將請原廠指定服務單位到府鑑定商品，請於退貨時一併將檢測單據附上，如無法附上或拒絕原廠指定服務單位到府檢測將視為良品退貨，並依照使用程度逐項收取費用。
2.   大型商品回收時將於回收地點現場基本商品狀況確認，如消費者拒絕人員確認或無法於取回地點確認，經人員回報後，則不允回收商品並拒絕退貨。
3.   配送或回收商品僅有一次免費派遣，如因消費者因素造成二派情況，產生費用將由消費者支付。
4.   配送人員安裝商品，視同消費者使用商品，如對商品有疑慮，消費者有權選擇不安裝
5.   本公司收到您下單(要約)後，仍需確認交易條件正確、供貨商品有庫存或服務可提供。如有無法接受訂單之異常情形，或您下單後未能完成正常付款，應視為訂單(買賣契約)全部自始不成立或失效，本公司得於合理期間內通知說明拒絕接受訂單。請您重新依需求下單訂購。